Descrizione
Fancoil compliant with international standards EN60335-1 and EN60335-2-40 and the requirements of the Eurovent program for non-ductile fan coils.
The fancoil will be equipped with three or five-stroke CA motors or EC variable speed motor with low power consumption.
The unit must be easy to install in the cabinet or recess type.
The fans will be tangential (for the smallest size) or centrifugal for all other sizes.
The sheet metal panels of the body will be characterized by high quality pre-finishing
The condensate collection bush will be in preformed plastic and will allow the same unit to be installed both horizontally and vertically without any additional accessory being required.
Built-in and factory-fitted battery, will suit you
operation in cooling and heating when used in systems with duo distribution.
The filters will be plated with polypropylene with EU1.
Each fan coil will be equipped with
Two or four-way valves (ie three-way built-in bypass) valves installed and tested in the factory completely insulated and inserted into a preformed insulating shell that prevents condensation on their body
Valve servomotors can be
Servo motors on / off for 230 V
Servo motors on / off for 24 V
Three-point floating servo motors for 230 V
Three-point floating servo motors for 24 V
Electronic thermostat with room temperature setting range from 10 to 30 ° C.
The main functions of the electronic thermostat are:
- cooling mode: for a minimum set point at 23 ° C.
- heating mode: for a set point maximal at 20 ° C.
- Automatic fan speed selection
- Automatic switch between cooling and heating mode (and vice versa),
- Remote Switching: Automatic switching between cooling fan and heating (as opposed to) as a remote signal comes from an external monitoring system.
- Prevention of hot and cold air currents:
- Air temperature sensor:
- Antifreeze protection calibrated 9 ° C.
- Optimization of the heating booster system management
- Energy Saving Function "Isolated condensate collection basin
